MMT primary mirror coating removed for re-aluminization

The 6.5-meter MMT primary mirror was stripped of its aluminum coating on July 23, 2010, in preparation for re-aluminization. A video of the mirror stripping can be seen at:

Removal of the aluminum coating is done with a series of scrubbing and rinsing treatments, using ordinary mops, paper towels, various cleansers, solutions, and water.  Great care must be taken to remove all of the existing aluminum coating as well as any contaminants from the mirror surface.

Unlike many other mirrors, the MMT is re-aluminized in situ with the mirror remaining on the telescope within its mirror cell during the entire aluminization process.  The mirror is enclosed in a large (>20-foot  diameter) vacuum bell jar from which all air and contaminants are removed.  Aluminum filaments are then vaporized, depositing a thin, even coating of reflective aluminum across the mirror face.

Although the aluminization event itself occurs in less than a second, weeks of preparation are required prior to the event.  Much of the hardware and electronics within the mirror cell must be removed prior to vacuum sealing.  All surfaces that will be inside the vacuum chamber must be thoroughly cleaned.  The hardware is then reassembled after aluminization and prior to any telescope operations.  The previous re-aluminization of the MMT primary mirror occurred in 2005.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: